Best Boat Bottom Paint For Speed : Review And Buying Guide

Ideal for use on fiberglass, wood or steel surfaces to prevent fouling below the waterline

Formulated to slowly release copper in order to prevent fouling

Able to recoat in 4 hours, to launch in 16 hours and covers up to 110 sq. ft.

Protective coating resists buildup of barnacles and other marine growth

Hard, smooth finish provides a flat sheen over most aged antifouling coatings

Best antifouling performance in the harshest fouling conditions for two years and beyond

Top rated antifouling in independent tests for maximum protection and long life

Maximum protection even during stationary periods at the dock or mooring

Patented self polishing copolymer technology with Biolux SPC

Paint Color: Black

Copper free ablative antifouling with maximum protection and extensive track record

Contains Econea to control shell growth

Ablative technology reduces drag and improves fuel usage

Suitable for all substrates, including aluminum

Paint Color: Black

Ideal for use on fiberglass, wood or steel surfaces to prevent fouling below the waterline

Formulated to slowly release copper in order to prevent fouling

Able to recoat in 4 hours, to launch in 16 hours and covers up to 110 sq ft

Protective coating resists buildup of barnacles, algae and other marine growth

Hard, smooth finish provides a flat sheen over most aged antifouling coatings

For use in mild to moderate fouling conditions

Suitable for both fresh and saltwater

Best for boats that are regularly hauled and cleaned

Use on fiberglass boats and all non-aluminum trailer boats

This item is not for sale in Catalina Island

High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with bottom paints or other 1- and 2-part paints

Provides superior corrosion protection on all underwater metals

Fast drying, with no sanding needed between coats

For use above and below the waterline

Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200

High-build two part epoxy primer and barrier coat for use above and below the waterline

Excellent for gelcoat blister prevention and repair work on fiberglass boats

Provides superior protection on all underwater metals

Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.

Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200.

DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention

EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method); can also be applied by spraying; for use above the waterline

SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean; will not fade, crack, or peel; easy to touch up; ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim

VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces; not for continuous submersion on boat bottoms that remain in the water longer than 72 hours

CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals)

COPPER-FREE ANTIFOULING PAINT for superior single-season protection on pontoons & aluminum hulls.

ABLATIVE PAINT wears away to continuously expose fresh biocide for maximum protection.

SPECIFICALLY FORMULATED FOR PONTOON & ALUMINUM BOATS. Bottom paints are used below the waterline only.

EXCELLENT PERFORMANCE ON OUTDRIVES & RUNNING GEAR. Copper-free formula won't cause galvanic corrosion.

AVAILABLE IN QUARTS & GALLONS, IN YOUR CHOICE OF BLACK OR BLUE. Coverage: 500 sq. ft. per gallon (125 sq. ft. per quart)

New

HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water

COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs; copper-free paint also means colors are much brighter than bottom paint that contains copper biocide

FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only; haul and relaunch without losing the effectiveness of the biocide

EASY TO APPLY: For brushing, use a high-quality, natural bristle brush; for rolling, use a 3/16” nap or foam solvent-safe roller cover; if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying)

AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only); Coverage: 500 sq. ft. per gallon; after applying, there’s no maximum dry time before launch

ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season; ideal for fiberglass, wood and steel boats in salt water and fresh water

ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water; minimizes bottom paint build up so you have less sanding to do next season; durable finish can be burnished for smoothness, speed & fuel efficiency

LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water; ideal for use in marinas and boat yards with environmental restrictions; no maximum dry time before launch

EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle; Roller - 3/16” nap or foam solvent-safe cover; Spray - airless or conventional; if needed, thin with water, up to 10%; apply 1-2 thin coats; no sanding needed between coats

AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes; Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints; for use on boat bottoms & hulls below waterline only

TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first; prevents corrosion and resists UV damage, chemicals and abrasion

ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree stands, ladders, boat trailers and more. Easy to create a camouflage finish for hunting

EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get superior adhesion to prepared aluminum without priming

ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water. Finish won't peel, chip, or fade

AVAILABLE IN EARTH BROWN, FLAT DARK EARTH, KHAKI, BLACK, WHITE, LIGHT GRAY, ARMY GREEN, AND OLIVE DRAB); Sizes: Quart and Gallon; Coverage: 80-100 sq ft/qt; 320-400 sq ft/gal; Use above or below the waterline

Inhibits corrosion on propellers, outdrives, shafts, struts, trim tabs, and other underwater metals.

Contains approximately 1.5% zinc pyrithione to keep metals surfaces smooth in service.

Fast-drying formula. At least 2 coats are recommended for excellent single-season protection.

Adheres strongly to properly prepared metals including aluminum, brass, bronze, stainless steel, cast iron, and galvanized steel.

Available in a 12 oz. aerosol spray. Color: Black. Finish: Flat. Coverage: 15 sq. ft.

Tackified synthetic rubber coating bonds to most fabrics to stop skidding and shifting

Durable rubber coating formula is machine washable and remains flexible

Will not transfer or yellow surfaces and will not pick up dirt or lint

Easy to use

Ideal for use on fiberglass, wood or steel surfaces to prevent fouling below the waterline

Formulated to slowly release copper in order to prevent fouling

Able to recoat in 4 hours, to launch in 16 hours and covers up to 110 sq ft

Protective coating resists buildup of barnacles, algae and other marine growth

Hard, smooth finish provides a flat sheen over most aged antifouling coatings

For use in mild to moderate fouling conditions

Suitable for both fresh and saltwater

Best for boats that are regularly hauled and cleaned

Use on fiberglass boats and all non-aluminum trailer boats

This item is not for sale in Catalina Island

New

ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection; copper biocide keeps barnacles and mussels from clinging to hull bottoms; ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions

EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat; best for boats used frequently; durable finish withstands trailering & beaching better than traditional ablative paints

FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS; because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season

EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100; spray equipment - TotalBoat Spray Thinner 101

AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon; this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only; it is not intended for household use